Mounting frame Congress-S 400 cm (20 cm)
Installation frame for flush mounting in suspended ceilings, scratch and impact resistant, powder coated in RAL 9016 traffic white. With inspection flaps for easy disassembly of the screen for maintenance, usually no ceiling builder required. For Congress screens with 400 cm fabric width and 20 x 20 cm housing.
> Inspection options without dismantling the enclosure > The noise-insulated motor ensures quiet operation, drive from projection direction on the right > Ceiling mounting by means of brackets on the outside of the enclosure > The weighting profile closes flush with the underside of the enclosure when retracted > Professional installation system for suspended ceilings, available as an option
The Congress-S is an extremely high-quality projection screen that is ideal for use in the congress and event sector. It is characterised by its special sizes of up to 12 metres and its technical equipment. It is possible to revise the entire projection screen without dismantling it (up to W 600 x H 400 cm). Depending on the format of the projection screens, the Congress-S is mounted in a robust sheet steel housing (from W 15 x H 15 cm) or in a galvanised housing from a width of 6 metres (from W 30 x H 30 cm). The Congress-S projection screen is available in various formats and designs. The Congress-S projection screen is designed for ceiling mounting by means of mounting brackets on the outside of the housing. The intelligent mounting technology allows all service and installation work to be carried out without dismantling the entire large projection screen and without the need for an additional inspection opening on site (up to W 600 x H 400 cm). If ceiling mounting of the projection screens is not possible in your premises, wall brackets can be ordered. However, if the existing furnishings do not allow direct wall mounting, you can obtain wall spacers. If the projection screen is to be installed flush with the ceiling, ceiling installation sets are available as an option. incl. safety catch and safety limit switch
show more
show less
> Inspection options without dismantling the enclosure > The noise-insulated motor ensures quiet operation, drive from projection direction on the right > Ceiling mounting by means of brackets on the outside of the enclosure > The weighting profile closes flush with the underside of the enclosure when retracted > Professional installation system for suspended ceilings, available as an option
The Congress-S is an extremely high-quality projection screen that is ideal for use in the congress and event sector. It is characterised by its special sizes of up to 12 metres and its technical equipment. It is possible to revise the entire projection screen without dismantling it (up to W 600 x H 400 cm). Depending on the format of the projection screens, the Congress-S is mounted in a robust sheet steel housing (from W 15 x H 15 cm) or in a galvanised housing from a width of 6 metres (from W 30 x H 30 cm). The Congress-S projection screen is available in various formats and designs. The Congress-S projection screen is designed for ceiling mounting by means of mounting brackets on the outside of the housing. The intelligent mounting technology allows all service and installation work to be carried out without dismantling the entire large projection screen and without the need for an additional inspection opening on site (up to W 600 x H 400 cm). If ceiling mounting of the projection screens is not possible in your premises, wall brackets can be ordered. However, if the existing furnishings do not allow direct wall mounting, you can obtain wall spacers. If the projection screen is to be installed flush with the ceiling, ceiling installation sets are available as an option. incl. safety catch and safety limit switch
Product number:
4006000202
Photos
4006000200_300x300px.jpg
