Konnect design click VGA to 13-pin

Connection panel with cable whip, VGA, fully assigned to 13-pin, half cover, front panel made of plastic, RAL 9010 white
> Front cover in sizes 50 x 25, 54 x 27, 55 x 28 mm included in delivery > Tool-free mounting
Konnect Design Multishare 21 HDBT
The Konnect design click Multishare 21 wall connection panel is a multi-format HDBaseT compatible transmitter for installation in a 2-gang switch frame. It allows HDMI, VGA and audio signals as well as control information to be transmitted loss-free over a single CAT-6/7 cable for up to 70 m to an HDBaseT compatible receiver. A connected active signal source is automatically detected and selected or switched at the touch of a button. Konnect Design Multishare 21 HDBT can switch the connected display device on/off via RS232 when a signal is detected. The connector panel can be powered locally or from the receiver side. Recommended HDBaseT
compatible receiver: 7488 000 066

- Inputs: 1 HDMI, 1 VGA/3.5mm audio
- Output: RJ45 (HDBaseT compatible)
- Transmission range up to 70m at Full HD/WUXGA resolution or 40m at 4K@30Hz via Cat-6/7 installation cable
- Supports HDMI 1.4a, 4Kx2K (30 Hz)
- HDCP 1.4 compliant, 3D compatible
- Supports VGA signals up to WUXGA (1920 x 1200@60 Hz)
- Advanced EDID management: pass-through, pre-defined EDID, manually stored EDID, (each for VGA and HDMI)
- Control: automatic source selection, via front button, RS232, contact inputs with LED feedback
- Power supply locally via mains 24VDC / 0.5A (included) or PoC or PoH via compatible receiver
- Power supply locally via mains 24VDC / 0.5A (included). PoH via compatible receiver
- Housing dimensions: 103 x 52 x 40mm (LxWxD)